In repeatedly vibrating screen equipment disintegration

by:Ultimate     2020-11-21

Further analysis of the structure of the vibrating screen that the main reason for lubricant loss: The first is shaken vibrating screen run the fastening bolt of the seal plate and gradually loosened the oil from the gap at the outflow;

In addition, the low viscosity of the lubricant, When seal the board Seal lax or equipment operation warming, bearing in vitro and in vivo pressure, leading to lubricant leakage.

Improve the vibrating screen lubrication method is:

1.Will produce good tubing welded to the sealing suet cup position, the top is higher than the balance on the tube card on the screen box.

2.Screw grease gun to raise the viscosity of the molybdenum disulfide grease, grease directly into the bearing oil through the tubing and seal the board;

3.The oil baffle plate installed in the eccentric shaft axis at the shoulder, the diameter than the bearing bore diameter, outer diameter is smaller than the bearing diameter, to avoid blocking the oil plate and the bearing outer ring friction.

4.The oil baffle plate bearing inner ring and eccentric shaft axis of shoulder positioning can play a good gear oil

5.Seal plate to tighten the bolt once clamped in place, the nuts and bolts firmly welded to prevent loosening.

4.The oil baffle plate bearing inner ring and eccentric shaft axis of shoulder positioning can play a good gear oil

5.Seal plate to tighten the bolt once clamped in place, the nuts and bolts firmly welded to prevent loosening.

Rock crusher : http://www.hxjqcrusher.com/crusher/Hammer-crusher.html

Raw material mill : http://www.hxjq-crushers.com/54.htm

Impact stone crusher : http://www.hxjq-crushers.com/6.htm

Custom message
Chat Online
Chat Online
Chat Online inputting...